Author Topic: You can never have enough chains!  (Read 1278 times)

0 Members and 1 Guest are viewing this topic.

Offline kopcicle

  • Jr. Member
  • **
  • Posts: 6
  • Karma: 0
  • Obfuscation Engineer
You can never have enough chains!
« on: September 26, 2013, 07:12:54 PM »
CHAIN (DK219H-82L)
14410-235-003  (replaces 14410-216-003)

JOINT, CAM CHAIN
14411-216-000

http://hondapeninsula.com/fiche_section_detail.asp?section=120034&category=MOTORCYCLES&make=HONDA&year=1965&fveh=2876

chain just happens to come from a CB160 (cam chain)

Now the balance chain is a Kawasaki part
Kawasaki 92057-1415 (CHAIN,CAM,BF05-104L)or at last check Tsubaki still makes the BF05 in bulk , you just have to find someone that carries it .
Seems a shame to cut 62 links out of 104 and use the rest for a bracelet ...

The later tensioner for the balancer has a thicker slipper for the starter chain and is a better adjuster for the balance chain . Take a good look while the flywheel is off . I have a fair copy of the parts fiche if needed .

If you find a better way of installing the flywheel/starter clutch/chain gears without dropping the key into the ... than I have please share . :D
"If a man wants to carry two cats home by their tails, by all means let him. He’ll learn things that he might not have otherwise even guessed, and the experience will be one he’ll not soon forget!"

~S. Clemens

Offline Garn

  • Sr. Member
  • ****
  • Posts: 320
  • Karma: 1
    • Sydney, Australia
Re: You can never have enough chains!
« Reply #1 on: October 16, 2013, 04:17:56 AM »
Kopcicle, thanks for the run-down on replacement chains...
I've been looking at Tx500 chains, in particular, the starter chain and the balancer chain.
I can see how to tension the balancer chain on the eccentric bush, however, I can't find any adjustments for the starter chain.... Maybe I can't see for looking!
I intend to adjust the balancer chain and thought I would do the starter while I'm at it!
RegardZ

Sorry just found that as a topic heading by CafeXS... I should read it ...Thanks!
« Last Edit: October 16, 2013, 04:23:34 AM by Garn »
Kawasaki Z1, Z1A, Z1B, Z900-A4 and TX500A
    Sydney, Australia

Offline kopcicle

  • Jr. Member
  • **
  • Posts: 6
  • Karma: 0
  • Obfuscation Engineer
Re: You can never have enough chains!
« Reply #2 on: March 04, 2019, 03:49:24 PM »
bump....
Still alive and well
"If a man wants to carry two cats home by their tails, by all means let him. He’ll learn things that he might not have otherwise even guessed, and the experience will be one he’ll not soon forget!"

~S. Clemens