Author Topic: A little drop from screw carburator  (Read 124 times)

0 Members and 1 Guest are viewing this topic.

Offline Rufus

  • Jr. Member
  • **
  • Posts: 34
  • Karma: -1
    • italy
A little drop from screw carburator
« on: March 15, 2019, 04:14:26 PM »
Hi everybody, a small drop comes out every 20-30 minutes from my carburator, what do you advise me to do? my mechanic says that you have to disassemble and clean but do you think it is not enough to unscrew the screw and replace any gasket?
thanks

Offline guylr

  • Administrator
  • Hero Member
  • *****
  • Posts: 1164
  • Karma: 19
    • ATL in the USA
Re: A little drop from screw carburator
« Reply #1 on: March 16, 2019, 11:48:08 AM »
It probably just needs a new o-ring, no need to disassemble the carb. The o-ring is still available from Yamaha, part number 93210-04230-00.


Guy
Now Retired Yamaha guy. Cut me and I bleed "Cinquasia Red"

Offline Rufus

  • Jr. Member
  • **
  • Posts: 34
  • Karma: -1
    • italy
Re: A little drop from screw carburator
« Reply #2 on: March 17, 2019, 06:04:28 PM »
Thank you, will be what I will do, even if  will be hard to unscrew is very very narrow  :'( I risk of ruining the screw