Author Topic: rear break: need your help!  (Read 5774 times)

0 Members and 1 Guest are viewing this topic.

Offline glennre5

  • Full Member
  • ***
  • Posts: 114
  • Karma: 0
    • Scarborough, North Yorkshire UK
Re: rear break: need your help!
« Reply #15 on: August 04, 2014, 11:10:48 PM »

Offline glennre5

  • Full Member
  • ***
  • Posts: 114
  • Karma: 0
    • Scarborough, North Yorkshire UK
Re: rear break: need your help!
« Reply #16 on: August 04, 2014, 11:13:22 PM »

Offline glennre5

  • Full Member
  • ***
  • Posts: 114
  • Karma: 0
    • Scarborough, North Yorkshire UK
Re: rear break: need your help!
« Reply #17 on: August 04, 2014, 11:21:35 PM »
Am sure this is not new news but am sure the master cyl piston is vented by this reed valve ...could the problem be the holes in the alloy simply block up ....mine are well blocked !!

Offline glennre5

  • Full Member
  • ***
  • Posts: 114
  • Karma: 0
    • Scarborough, North Yorkshire UK
Re: rear break: need your help!
« Reply #18 on: August 05, 2014, 09:48:35 PM »
Any way sorted now ..the vent hole was well blocked

Offline winslowtaft

  • Newbie
  • *
  • Posts: 4
  • Karma: 0
Re: rear break: need your help!
« Reply #19 on: August 05, 2014, 10:02:14 PM »
glad to hear that. i hadn't realized that was a reed valve on the end of the plunger. now i wonder if mine is still clogged and what that might effect.

Offline glennre5

  • Full Member
  • ***
  • Posts: 114
  • Karma: 0
    • Scarborough, North Yorkshire UK
Re: rear break: need your help!
« Reply #20 on: August 05, 2014, 11:31:13 PM »
Note... the problem was the hole blocked as per checking by shining a light  .....