FAQ: What System Does Harley Davidson Smart Security System Control?
- 1 What is the Harley Davidson security option?
- 2 How do I know if my Harley has a security system?
- 3 What does Harley key fob do?
- 4 Can you start a Harley without the key fob?
- 5 How do I turn off the security on my Harley?
- 6 How much is a Harley key fob?
- 7 What does the red key light mean on a Harley?
- 8 Do Harley Davidsons have keys?
- 9 How long do Harley key fob batteries last?
- 10 Are Harley key fobs waterproof?
- 11 How do I start Dyna without a fob?
- 12 What is the default Harley security code?
What is the Harley Davidson security option?
The only security system designed and approved by the Harley-Davidson® Motor Company. When armed, the Security System disables the starter and ignition while monitoring the electrical system and vehicle motion with adjustable sensitivity.
How do I know if my Harley has a security system?
Registered. One way to tell for sure is to determine whether your bike has a Turn Signal Module (TSM) or a Turn Signal Security Module(TSSM) installed. TSM = no security system TSSM = security system. On the side of the module there should be a sticker with a H-D part number.
What does Harley key fob do?
With an assigned fob present, the system automatically disarms when the ignition key is turned to IGNITION. When the module disarms, the optional siren will chirp once and the key icon will illuminate for a solid four seconds and then turn off.
Can you start a Harley without the key fob?
If you have a security-equipped Harley-Davidson, you know that without your key fob present, the bike will not start. Using the left turn signal to cycle through the digits and the right turn signal to select and move onto the next slot, you enter your personalized five-digit PIN and your bike will start.
How do I turn off the security on my Harley?
Before the security lamp goes out, turn the ignition switch to OFF. Within three seconds, simultaneously press both the left and the right turn signal switches. After the turn signals flash once, the system enters the transport mode. With the fob removed, the motorcycle can be moved without setting off the alarm.
How much is a Harley key fob?
The average cost for a replacement key made by vin is $50 and can be done by most if not all local authorized Harley Dealer.
What does the red key light mean on a Harley?
The red “key” light is telling you that the security system is operational. The fact that it goes out after you start it up means that the security system is disarmed.
Do Harley Davidsons have keys?
Actually, Harleys don’t use keys. To start the bike just flip-up that little chrome cover on top of the gas tank. Underneath you will find a small microphone.
How long do Harley key fob batteries last?
HD recommend that you replace the battery in your Harley-Davidson key FOB every 12 months.
Are Harley key fobs waterproof?
The fob isn’t waterproof. Like Greg mentioned, wrap it in aluminum foil to keep the security module from reading it, then place it in a nice little ZipLoc bag and stash it with your luggage. If you want to make sure no one mess’s with it, tuck it in with the dirty underwear.
How do I start Dyna without a fob?
STARTING YOUR HARLEY-DAVIDSON WITHOUT YOUR FOB! Immediately hold both turn signal indicators until FIVE dashes appear in the odometer gauge. Select the first digit of your PIN (a) by pressing the left turn signal button (a) times. Press the right turn signal switch one time to move to the next digit.
What is the default Harley security code?
By Bikers For Bikers. VIDEO-If your Harley Davidson is equipped with a factory installed alarm then you really need to immediately change your security PIN code. Harley puts a standard factory preset PIN code and it is usually 31313.