How To Change Oil On A Harley Davidson Heritage Softail?

Where is the oil drain plug on a 2002 Heritage Softail?

The oil drain us usually a hose with a plug in it that is held by a clip on the frame. It us usually on the right hand side of the bike just behind and underneath the transmission side cover.

What type of oil goes in a Harley primary?

You actually have a couple of choices for the primary drive. The optimum product would be Mobil 1 Racing™ 4T 10W-40 motorcycle oil, but it is also okay to use Mobil 1™ V-Twin 20W-50.

How much primary oil goes in a Harley Softail?

Fill the primary with oil Harley Davidson Softails require one quart of primary fluid. Be sure to check your owner’s manual or the AMSOIL Product Guide for the correct primary oil capacity for your bike. Once you’ve filled the primary case with fluid, double check the fluid level visually.

How much oil goes in a Harley transmission?

The transmission fluid capacity is approximately 24 ounces (0.71 liters).

How often should I change the primary oil in my Harley?

Oil changes as per Owners manual every 5k Miles, Tranny and Primary every 10K. If you ride it more you’ll be changing it more often.

You might be interested:  Readers ask: Harley Davidson How Full Should Oil Filter Be During Change?

How much oil goes in a Harley 103?

Start the drain plug into the oil pan by hand. Snug it; and final tighten to 14 – 21 foot lbs. Now, remove your fill plug and pour 3 full quarts into the fill allocation. This is, now, a sufficient amount of oil to check your oil level.

What is the best oil for a Harley Davidson?

Here are our top recommended the best oil for Harley Davidson V-Twin Cam:

  • Best Overall: AMSOIL FULL SYNTHETIC Motorcycle Oil 20W-50.
  • Runner-Up: Mobil 1 96936 20W-50 V-Twin Synthetic Motorcycle Motor Oil.
  • Best Budget: Castrol 06116 POWER1 V-TWIN 4T 20W-50.

How much oil does a 2004 Harley Davidson take?

The 2004 Harley-Davidson Heritage Softail is an old school cruiser style motorcycle. The crank case holds three quarts of Harley engine oil and the oil filter is located on the rear of the crank case on the oil pump.

Do you check Harley oil on kickstand?

The transmission oil is checked with the motorcycle on a level surface and on the kickstand. The transmission oil level is correct when between the Add and Full marks on the dipstick.

What is a 3 hole oil change?

What is a 3-Hole Oil Change? A 3-hole oil change is when you replace the oil in all 3 essential components of the powertrain: Engine. Transmission.

What weight oil goes in a Harley-Davidson?

Under a majority of circumstances, most Harley-Davidson bikes can function with oil that carries a weight of 20W-50. It can handle temperatures that range up to 100 degrees Fahrenheit, but some facts and variations are worth noting: You should utilize 10W-40 when your local temperatures never rise above 60 degrees.

Leave a Reply

Your email address will not be published. Required fields are marked *