Question: How To Install Rfy Shocks On A Harley Davidson?

How do you install Softail shocks?

How to Install Shocks on a Softail Motorcycle

  1. Raise the bike with a bike lift. Place the lift toward the rear of the bike frame so it will lift the rear tire off the ground.
  2. Install the frame end of the left shock first. Ensure that the shock eye and frame holes are clean and free of debris or oil.

How do I adjust my shocks?

7 Steps To Finding Your Perfect Shock Setting

  1. Set bump and rebound full soft.
  2. Do an out and in lap.
  3. Add bump in two click increments until the “feel” of steering improves, doing an out and in lap with each adjustment.
  4. Now add rebound in two sweep (or click) increments until car “feel” (driver confidence) improves.

Can you change shocks without a jack?

You do not need to jack up the truck to remove or replace the REAR shocks. The front shock would require the truck to be jacked up to remove the tires.

Can I put longer rear shocks on my motorcycle?

If you leave the forks stock and just add longer shocks, it will lessen your fork rake, making the steering quicker but less stable at higher speeds. It will slightly alter your center of gravity and put more weight on the front tire as well, which means less wheelies and, again, quicker steering.

You might be interested:  Question: Where Is The Choke On A Harley Davidson?

Can you put shocks on upside down?

No. With the exception of a few specialty shocks, you should never mount your shock absorbers upside down. Typical twin-tube shocks are simply not designed to function upside down for many important reasons.

Where are the shocks on a Softail?

Softail models feature adjustable rear shock absorbers located beneath the motorcycle. They function opposite of a conventional shock, as they are inverted. Positioned horizontally under the motorcycle, the shock is mounted to the frame in the front of the bike and to the swing arm in the rear.

How does a Softail frame work?

For its suspension system, the Softail utilizes a cage that looks like an old rigid frame to replace the swingarm. Instead of visible outboard shocks, Softails use a pair of shocks that operate in extension-the shocks get longer as the suspension compresses-to support and dampen the movement of the rear suspension.

Can you put car shocks on a motorcycle?

You need coil overs, and they are no cheaper by any means to shocks for a bike. Most car “shocks” (not coil over struts) are JUST shock absorbers. They are designed for installation on suspensions where a separate (control arm or live axle mounted) coil or leaf springs provide the support for the suspension.

How do I know if my rear shocks are bad on my motorcycle?

Symptoms: The ride will feel soft or vague and as speed increases, the rear end will want to wallow and/or weave over bumpy surfaces and traction suffers. Loss of traction will cause rear end to pogo or chatter due to shock returning too fast on exiting a corner.

You might be interested:  Question: How Owns Harley Davidson 2017?

How long do motorcycle shocks last?

In general most OEM shocks are shot by about 30K miles or so. Whatever brand shock you use, you are either going to have to replace or rebuild it every 30-40K miles if you want it to continue to perform well.

Leave a Reply

Your email address will not be published. Required fields are marked *