Question: How To Program My 2008 Harley Davidson Street Glide Security Fob?

Can I program my own Harley key fob?

As long as you have the key, you can do the remote’s programming on your own. It involves a combination of setting the ignition bezel back and forth in the correct positions, pressing the turn signals and pushing the remote’s buttons at the right time.

How do I reset my Harley Davidson key fob?

Turn the key to IGNITION. Immediately hold both turn signal indicators until FIVE dashes appear in the odometer gauge. Select the first digit of your PIN (a) by pressing the left turn signal button (a) times. Press the right turn signal switch one time to move to the next digit.

What is the default Harley security code?

By Bikers For Bikers. VIDEO-If your Harley Davidson is equipped with a factory installed alarm then you really need to immediately change your security PIN code. Harley puts a standard factory preset PIN code and it is usually 31313.

What does the button on a Harley key fob do?

Retract key: Press the button to release the key. Rotate the key back into the fob body. The key fob remotely locks and unlocks the fork lock switch, saddlebags and Tour-Pak. The key fob can actuate the locks while the motorcycle is on or off.

You might be interested:  Often asked: How Do You Program A Harley Davidson Buttonless Key Fob?

How much does it cost to replace a Harley Davidson key fob?

Compare to other motorcycle and car key, Harley Davidson key is one of the best keys to lose. The average cost for a replacement key made by vin is $50 and can be done by most if not all local authorized Harley Dealer.

What kind of battery does a Harley key fob take?

1. Insert a five cent coin or similar size blade into the thumbnail slot on the side of the FOB to separate the two halves. 2: Remove the old battery and discard. 3: Install a new battery (Size 2032) with the positive (+) side facing down.

Why does my Harley security light stay on?

It could be something as simple as one of your signal or running lights is out. The key light stays on if you have a blown bulb.

Why is my Harley Davidson asking for a PIN?

If you have a security-equipped Harley-Davidson, you know that without your key fob present, the bike will not start. Using the left turn signal to cycle through the digits and the right turn signal to select and move onto the next slot, you enter your personalized five-digit PIN and your bike will start.

Why does my Harley FOB not work?

If your fob doesn’t work, make sure the battery is good and inserted correctly. If dead, you should be able to get a replacement from a dealer. If you don’t know your PIN, you should. A dealer can reset it for you, but I’m sure they are pretty proud of that service.

Leave a Reply

Your email address will not be published. Required fields are marked *