Question: What Weight Oil For Harley Davidson?

What oil does Harley-Davidson recommend?

Ans: For all weather conditions, Harley Davidson recommends SAE 20W50 synthetic oils the Twin Cam engine. But if you live in a region where it gets below 40F, you should get something that maintains SAE 10W40 standards. Similarly, SAE 60 H-D is suggested for higher temperatures above 80 degrees.

What weight oil is Harley primary oil?

You actually have a couple of choices for the primary drive. The optimum product would be Mobil 1 Racing™ 4T 10W-40 motorcycle oil, but it is also okay to use Mobil 1™ V-Twin 20W-50.

What weight is Harley-Davidson transmission oil?

Is there any problem with this? Our answer: It is perfectly acceptable to use 75W-140 gear oil in Harley-Davidson transmissions. But, do consider that 75W-140 is much thicker than oils typically used in Harley transmissions. For instance, AMSOIL V-Twin Synthetic Transmission Oil is an SAE 110 gear oil.

Can I use 10W40 in my Harley?

Use the 10w 40 in the primary and either a 20w 50 or a 60 weight in the crankcase. Your engine will be happier and also run a little quieter. It problably wouldn’t hurt anything though since most other motorcycle oils when used in a harley crankcase shear back to a 40 weight anyway.

You might be interested:  Often asked: How Did Harley Davidson Get The Name Hog?

Can I use car oil in my Harley-Davidson?

Can I use car oil in my Harley? If the oil is of good quality, then you can use it on your Harley. However, the oil should be SJ rated as it may end up destroying the roller bearings. The best oil to use on your bike should be labeled as motorcycle oil.

How often should I change synthetic oil in my Harley?

Fully synthetic oil is best changed every 7,000 to 10,000 miles, according to Rips & Rides. If you use your motorcycle regularly or for long distances, you may need to change your oil more frequently, regardless of the oil type it uses. It is important to check your oil quality and level regularly.

Can you use synthetic oil in Harley primary?

Answer: For any Harley Twin-Cam engine, we highly recommend using AMSOIL Synthetic 20W-50 in “all three holes” (as they put it) for two essential reasons. These are called AMSOIL V-Twin Primary Oil and AMSOIL V-Twin Transmission Oil.

What kind of fluid goes in a Harley clutch?

Harley-Davidson recommends that you replace/flush the DOT 4 brake fluid in your Harley clutch system every two years regardless of mileage.

Can I use 20w50 in my Harley transmission?

Which choice is better for Harley-Davidson transmissions? A particularly nice feature about AMSOIL 20W-50 Synthetic Motorcycle Oil is that it can be used in the engine, transmission and primary chaincase of Harley-Davidson motorcycles.

When should I use 20W50 oil?

20W50 motor oil is suitable for warmer climates, where the higher temperature causes the oil to thin. It is also useful for vehicles subject to hot temperatures and for those used for high-stress activities such as hauling or pulling trailers.

You might be interested:  What Is A Good Name For A Black Harley-davidson Touring Bike?

Who makes Harley oil?

Harley-Davidson oil is manufactured by Sunoco.

What oil does a Harley 103 take?

The chances are, your recommended oil will be 20W50 as that’s the most common grade for Harleys. Whether you’re running a 103, a Twin Cam or a Softail and whether you run Synthetic or Regular oil, the right oil will make all the difference.

Leave a Reply

Your email address will not be published. Required fields are marked *