Quick Answer: How About Polish The Front Forks On A Harley Davidson?

How do you lower the front forks on a motorcycle?

The only real way to do this is to raise the bike’s front end off the ground with a proper stand (one that raises the bike from the lower triple clamp, NOT the race stands that prop up under the bottom of the fork tubes), remove the fork springs and slowly raise the fork until it bottoms out.

Does WD 40 polish aluminum?

It’s a very gentle polish, used for brass-plated musical instruments and can be used on stainless steel, aluminum, chrome, pewter, bronze and copper as well as brass.

How do you restore polished aluminum?

Vinegar. A simple solution of vinegar and water will not only clean aluminum surfaces but also polish the aluminum to restore its original shine. In a spray bottle, mix equal parts of water and white vinegar. Spray directly onto the surface and wipe away with a soft cloth.

Can you polish motorcycle forks?

Since most motorcycle fork tubes are made from aluminum, they can be polished to a near chrome-like shine using only a few easily obtained items. However, while polishing your fork tubes yourself can save you a great deal of money, the project takes patience and determination.

How do you polish aluminum on a motorcycle?

How to Polish Aluminum Motorcycle Parts

  1. Apply varnish stripper to a cloth and rub the varnish off the motorcycle parts–aluminum parts have a protecting varnish that has to be removed before polishing.
  2. Wash the parts with car soap and water.
  3. Sand all scratches with sand paper until the surface of the metal is smooth.
You might be interested:  Readers ask: Harley-davidson 2011 Ultra Classic Abs Light Want Go Out When Riding It?

Can pitted Forks be repaired?

It can be fixed. Not with Araldite or fibreglass resin, which I believe is very similar. I had some pitting in forks repaired using something called liquid metal. It gave a metalic finish and worked well though isn’t shiney like chrome.

Are pitted Forks an MOT failure?

Not only are damaged and underperforming forks dangerous on the road, they are also an MOT failure. The conditions of the MOT test require that: There should be no oil visible on the fork tube or leaking down the slider around the fork oil seal areas. The forks must be adequately dampened.

Can you re chrome fork tubes?

Typically the procedure is to grind the tube undersize, then build up with hard chrome past the finish size, then regrind to finish.

Leave a Reply

Your email address will not be published. Required fields are marked *