Quick Answer: How Do I Start My 2013 Harley Davidson With No Keys?

What do I do if I lost my Harley Davidson key?

While it’s advisable to have a spare cut before you lose your original, there are ways to get a new key. A locksmith can use your bike’s ignition cylinder code or the entire ignition cylinder to make a new key. You also have the option of reordering a key from a local dealer, using your bike’s VIN.

How do I disable my Harley security system?

Before the security lamp goes out, turn the ignition switch to OFF. Within three seconds, simultaneously press both the left and the right turn signal switches. After the turn signals flash once, the system enters the transport mode. With the fob removed, the motorcycle can be moved without setting off the alarm.

What does the red key light mean on a Harley?

The red “key” light is telling you that the security system is operational. The fact that it goes out after you start it up means that the security system is disarmed.

You might be interested:  Readers ask: Harley Davidson How Much Did You Pay?

What is the Harley Davidson security option?

The only security system designed and approved by the Harley-Davidson® Motor Company. When armed, the Security System disables the starter and ignition while monitoring the electrical system and vehicle motion with adjustable sensitivity.

Can a locksmith make a Harley Key?

Can a locksmith make a Harley Davidson key? Yes. Most locksmiths can originate a new key for your bike within minutes.

Are Harley keys universal?

No they are not unique either. Other people have a key just like yours. It is a good idea to record the number the plastic. If you ever lose your keys you can have Harley make you a copy from that number.

What to do when you’ve lost your keys?

Keep reading to learn what you should do.

  1. Contact your insurance company. This applies to both lost or stolen house and car keys.
  2. Call the police.
  3. Change your locks.
  4. Watch out for locksmith scams.

Is it hard to hotwire a motorcycle?

Learning how to hotwire a motorcycle is not a complicated process, so it’s a good skill to know. That said, if you know how to hotwire your machine, you can purposely make it harder for thieves to steal from you because you know what they’ll try to do.

Is it possible to hotwire a motorcycle?

There are several ways to hotwire a motorcycle. You need a few tools like wires, a screwdriver, and hammers. You may also need to get a diagram of your bike’s electrical wiring. Choose the easiest with the tools you have and you should be able to get back on the road after losing your keys.

You might be interested:  Quick Answer: Harley Davidson Vs Suzuki Which Should I Buy?

How do you open a locked motorcycle door without a key?

Minors and children should not attempt these steps without adult supervision.

  1. Use a Locksmith.
  2. Contact a Local Bike Shop.
  3. Use a Lock Pick.
  4. Use a Plastic Pen (BIC/Biro Style Pen)
  5. Use a Shim to open the lock without keys.
  6. Cut the Lock off Yourself.

How do I know if my Harley has a security system?

Registered. One way to tell for sure is to determine whether your bike has a Turn Signal Module (TSM) or a Turn Signal Security Module(TSSM) installed. TSM = no security system TSSM = security system. On the side of the module there should be a sticker with a H-D part number.

How do you put a motorcycle in neutral without a key?

Keep the clutch depressed with the left hand, and lift gently up on the shifter pedal/lever with your left toe. You should feel a slight click as the transmission finds its way to neutral position between first and second gears. You can repeat this step as many times as necessary to get the feel for it.

Leave a Reply

Your email address will not be published. Required fields are marked *