Readers ask: How To Change A Stator On A Harley Davidson Fat Bob?
- 1 How do you know if your stator is bad on a Harley?
- 2 How much does it cost to replace a stator on a Harley?
- 3 How long does it take to replace a Harley stator?
- 4 Is it hard to replace a stator?
- 5 Can you ride a Harley with a bad stator?
- 6 What causes stator failure?
- 7 How long does it take to replace a stator?
- 8 How much does it cost to replace a stator on a motorcycle?
- 9 How much does it cost to fix a stator?
- 10 How much does Harley charge to replace clutch?
- 11 Where is a stator located?
- 12 What does a stator do in a generator?
How do you know if your stator is bad on a Harley?
What are the symptoms of a bad motorcycle stator? The most obvious symptoms of a bad motorcycle stator include no spark, weak spark, or intermittent spark (also known as misfiring). Hard starts and a poorly running engine can also be clues that your stator needs to be rebuilt or replaced.
How much does it cost to replace a stator on a Harley?
5,000 service ’14 Ultra Limited, $397 with synthetics. ’05 Heritage Classic stator replacement, $115.
How long does it take to replace a Harley stator?
I bet a good tech can do a stator change in less then 3 hours and a belt change would take 6 or 7 hours. If your belt has been properly maintained it should go over a 100,000 easily.
Is it hard to replace a stator?
Replacing the stator is not too complicated and requires a socket set and some heat resistant gasket repair silicone only. On 2006-07 Honda Fireblades the stator is located on the left hand side behind the crash protector.
Can you ride a Harley with a bad stator?
Battery: The stator system charges your battery and replenishes it. You could actually run your motorcycle just fine for some time without a working stator as the battery has reserve current. Of course, the battery would eventually die.
What causes stator failure?
When a stator fails, it is largely due to the degradation or aging of its insulation through external occurrences and materials being introduced into its system.
How long does it take to replace a stator?
A good tech can change a stator in 3 hours and a belt in 6 or 7 hours. Your belt should go over 100,000 if it has been properly maintained.
How much does it cost to replace a stator on a motorcycle?
The R/R and stator are indeed about $150 each ($152 and $158, plus tax comes to about $330), plus the gasket for the stator cover. Work time is probably around an hour or two, two if they relocated the regulator and with hourly rounding, so I’d say they overcharged you by about $100-150.
How much does it cost to fix a stator?
Stator & Rotor A new stator and rotor set typically costs between $250 and $1,500. They are stationary and rotating parts of any system that generates electricity. When they stop working seamlessly, they need repair or replacement.
How much does Harley charge to replace clutch?
How much does Harley charge to replace clutch? Air filter replacement cost on Harley-Davidson is estimated at $100 to $200, whereas the ‘Brake Pad’ needs $250 for the replacement. Clutch replacement cost is $200 to $450 on average.
Where is a stator located?
Stators are inside the engine case. An automotive style alternator is a fully self-contained, externally mounted unit that creates DC current. Another difference between stators and automotive style alternators is the type of magnet uses. Stators use a permanent magnet, and automotive alternators use an electro-magnet.
What does a stator do in a generator?
In an electric motor, the stator provides a magnetic field that drives the rotating armature; in a generator, the stator converts the rotating magnetic field to electric current. In fluid powered devices, the stator guides the flow of fluid to or from the rotating part of the system.