Readers ask: How To Change Oil In Harley Davidson Ultra Classic?

Where is the engine oil drain plug Harley-Davidson?

Look directly below the seat– and slightly behind it – underneath the frame to find the oil drain plug. Use a ratchet and 5/8-inch socket to remove the drain plug. Once loose, finish removing the plug by hand to avoid dropping it into the oil pan.

How do you change the oil on a 2002 Ultra Classic?

02 ultra Classic 3 hole Oil change

  1. Place the bike on the jiffy stand to check engine oil or to change engine oil.
  2. Remove oil filler cap/dipstick to help drain the oil.
  3. Remove the engine oil drain plug.
  4. Drain the engine oil.
  5. Remove the old oil filter and install the new oil filter. (

Do you check Harley oil on kickstand?

The transmission oil is checked with the motorcycle on a level surface and on the kickstand. The transmission oil level is correct when between the Add and Full marks on the dipstick.

You might be interested:  FAQ: How Many Cc's Is A 2007 Harley Davidson Heritage Softtail?

What kind of oil goes in Harley primary?

You actually have a couple of choices for the primary drive. The optimum product would be Mobil 1 Racing™ 4T 10W-40 motorcycle oil, but it is also okay to use Mobil 1™ V-Twin 20W-50.

How much oil goes in a Harley transmission?

The transmission fluid capacity is approximately 24 ounces (0.71 liters).

How often should you change primary oil in my Harley?

Oil changes as per Owners manual every 5k Miles, Tranny and Primary every 10K. If you ride it more you’ll be changing it more often.

How much oil goes in a Harley primary?

Fill the primary with oil Harley Davidson Softails require one quart of primary fluid. Be sure to check your owner’s manual or the AMSOIL Product Guide for the correct primary oil capacity for your bike.

What is the best oil for a Harley-Davidson?

Here are our top recommended the best oil for Harley Davidson V-Twin Cam:

  • Best Overall: AMSOIL FULL SYNTHETIC Motorcycle Oil 20W-50.
  • Runner-Up: Mobil 1 96936 20W-50 V-Twin Synthetic Motorcycle Motor Oil.
  • Best Budget: Castrol 06116 POWER1 V-TWIN 4T 20W-50.

How many quarts of oil does it take to change?

The largest cost in a typical oil change is the oil itself. Oil prices range widely, but a car or truck usually needs 4 to 6 quarts of motor oil.

How much oil goes in a Harley 103?

Start the drain plug into the oil pan by hand. Snug it; and final tighten to 14 – 21 foot lbs. Now, remove your fill plug and pour 3 full quarts into the fill allocation. This is, now, a sufficient amount of oil to check your oil level.

You might be interested:  Readers ask: What Is The Make Of Harley Davidson The The Sons Of Anarchy?

What is a 3 hole oil change?

What is a 3-Hole Oil Change? A 3-hole oil change is when you replace the oil in all 3 essential components of the powertrain: Engine. Transmission.

What happens if I put too much oil in my Harley?

Adding too much oil to a motorcycle will increase the pressure in the crankcase which in turn forces oil out of the engine and into your intake system. This can cause damage to the engine as well as burn oil in the engine where oil is not supposed to be present. Too much oil or too little oil will damage components.

What kind of oil do you put in a Harley-Davidson transmission?

Heavy Synthetic Gear Oil. TESTED-CERTIFIED for use in Harley-Davidson transmission and primary chaincase applications.

Leave a Reply

Your email address will not be published. Required fields are marked *