Readers ask: How To Use Pin Harley Davidson?

What is the factory pin for Harley Davidson?

VIDEO-If your Harley Davidson is equipped with a factory installed alarm then you really need to immediately change your security PIN code. Harley puts a standard factory preset PIN code and it is usually 31313.

How do I change the PIN on my Harley?

Select the first digit of your PIN (a) by pressing the left turn signal button (a) times. Press the right turn signal switch one time to move to the next digit. Select the second digit of your PIN (b) by pressing the left turn signal switch (b) times.

What does the key light mean on my Harley?

The red “key” light is telling you that the security system is operational. The fact that it goes out after you start it up means that the security system is disarmed.

Why is my Harley Davidson asking for a PIN?

If you have a security-equipped Harley-Davidson, you know that without your key fob present, the bike will not start. Using the left turn signal to cycle through the digits and the right turn signal to select and move onto the next slot, you enter your personalized five-digit PIN and your bike will start.

You might be interested:  Quick Answer: What Are Harley Davidson Street Bikes?

How do I get my Harley out of transport mode?

When the vehicle is in the transport mode, the security system does not respond to motion detection. To exit the transport mode, use the key fob to disarm the vehicle.

What do I do if I lost my Harley Davidson key?

While it’s advisable to have a spare cut before you lose your original, there are ways to get a new key. A locksmith can use your bike’s ignition cylinder code or the entire ignition cylinder to make a new key. You also have the option of reordering a key from a local dealer, using your bike’s VIN.

How do I reset my Harley Davidson?

Harley Davidson Touring: How to Reset Your ECM

  1. Step 1 – Turn run switch on. Before you start the reset procedure, be sure your run/stop switch is turned on.
  2. Step 2 – Turn ignition on and off. With the run/stop switch on, turn the ignition on and then off three times.
  3. Step 3 – Turn run switch off.

Leave a Reply

Your email address will not be published. Required fields are marked *