What Gear Lube For A 2008 Harley Davidson Nightster?

What kind of transmission fluid does a Harley-Davidson Sportster take?

The manufacturer recommends using 20w50 oil. Make sure that the oil you use is approved for wet clutches.

Can you use gear oil in Harley transmission?

Our answer: It is perfectly acceptable to use 75W-140 gear oil in Harley-Davidson transmissions. For instance, AMSOIL V-Twin Synthetic Transmission Oil is an SAE 110 gear oil.

How much oil does a 2008 Harley Nightster take?

Do not use the oil filter wrench to tighten the filter. The Sportster uses 3.6 quarts of oil.

How often should I change the transmission oil in my Harley?

How often should I change the tranny oil in my Harley? According to the manufacturer’s service manual, you should change the engine oil at 5,000 miles. Primary oil should change at 10,000 miles, and trans fluid at 20,000 miles. A transmission oil change should happen every year.

How often do you change the primary oil in a Harley?

Oil changes as per Owners manual every 5k Miles, Tranny and Primary every 10K. If you ride it more you’ll be changing it more often.

You might be interested:  Question: 2014 Harley Davidson Flhtcu What Does The Pa Relay Do?

What kind of fluid goes in a Harley clutch?

Harley-Davidson recommends that you replace/flush the DOT 4 brake fluid in your Harley clutch system every two years regardless of mileage.

How much oil goes in a Harley-Davidson primary?

Fill the primary with oil Harley Davidson Softails require one quart of primary fluid.

Can I use 75w90 in my Harley transmission?

It’s a synthetic gear oil. It will be just fine in the trans. I would recommend using gear oil in there over motor oil.

How much oil goes in a Harley transmission?

The transmission fluid capacity is approximately 24 ounces (0.71 liters).

Can I use 20w50 in my Harley transmission?

Which choice is better for Harley-Davidson transmissions? A particularly nice feature about AMSOIL 20W-50 Synthetic Motorcycle Oil is that it can be used in the engine, transmission and primary chaincase of Harley-Davidson motorcycles.

Can you use ATF in Harley primary?

We submit that ATF is too thin for Harley primary use. It’s true that many Harley riders have had years of problem-free performance with ATF. We contend that a thicker oil will provide superior metal-to-metal wear protection. Chains and sprockets will last longer using a fluid with an appropriate viscosity.

What kind of oil does an iron 883 take?

AMSOIL synthetic lubricants are the solution for riders who want the most from their 2017 Harley -Davidson XL883N Iron 883. They resist the devastating effects of extreme heat, even in rally or parade traffic on hot days. They deliver excellent wear protection and engine cleanliness while promoting smooth shifts.

Leave a Reply

Your email address will not be published. Required fields are marked *